Thread: build it
View Single Post
  #1  
Old 03-04-2009, 09:01 AM
k9yli k9yli is offline
New Member
 
Join Date: Jan 2009
Posts: 14
k9yli is on a distinguished road
Smile build it

I just finished my third copy of the ARRL HANDBOOK 28 volt power supply,
modified to 13.8 volts.
I started with a 44volt 16 amp transformer purched for $5 at a , you got it,
a farm show flea market..
Using a digital volt meter and a sharp tool I found the exact center of the output winding within a few hundredths of a volt.
I cut the winding with a dremel tool and added two wires to parallel the windings , making a 22 volt 32 amp winding.
Built the whole thing in a cabinet from a TV sweep generator.
I used a different output transistor than the 3055s called for.
I used a 30 amp version.
With the sheetmetal work etc, I have abut 40 hours in it.

Get out there and build.!!!!!!!

I have ictures but can't figure out how to insert them. right clik image doesnt work

Last edited by k9yli : 03-06-2009 at 12:19 PM. Reason: pictures
Reply With Quote