Ok,
Here is out network to complete the output stage of the generator. As you can see the divide by 10 stages can daisy chain from each other. Each section must be in it's own sealed box. All componet leads must be as short as possible. You can use the small teflon coated coaxial cable to connect is stage. Do this by drilling a small hole to pass the coax through then fold the braid back and solder to the enclosure.
Remember, ever component in this stage radiates RF.
I suggest finding and enclosure that will house the radio and other component. Also to house future upgrades that can be added. I would even reinstall the original covers on the radio. Everything must be grounded and sealed. So get you some aluminum tape.
More later
